A Dragon’s Death Angel With a Gun

Back a few months ago, Jason Schmetzer asked me if I was interested in writing all of the upcoming TRO:3145 House Kurita entries.

Despite my self-imposed hiatus.

I took a couple days to think about it. In the end, I agreed for a couple reasons:

1. This TRO project is being written along the parameters born from a conversation with Jason several months ago. We wanted to bring back the ‘classic’ feel of the FASA-era technical readouts, such as the classic 3025, 2750, and 3050 tomes. The focus in those were on battles, history, and “can I replicate that encounter on the tabletop?” After a glut of TROs the last several years that focused more on the corporate and bureaucratic wrangling, it seemed like this was the best place to do it.

2. During this time, we also decided to challenge our writer pool. Who could follow directions? Who could turn in stuff on time? Who was capable of crafting great, compelling entries that didn’t use the word “design” or re-state the stat blocks in written form? If we were challenging them, then it was also up to Jason and I to put our money where our mouths were.

3. Entries like these are in the 500-750 word range. That’s about 45 min for me to crank out, something that I can do quite easily during my lunch hour or while my wife does normal garden maintenance in the evening.

4. I needed a modern House Kurita fix. After letting Geoff Swift take the reigns for a while after the Jihad, I needed to infuse some old-school Combine combat honor into the Dark Age.

So after a few weeks – and a nice helpful assist from Jason when I got hit with an unexpected video project at work – the TRO:3145 Draconis Combine was written, reviewed, edited, and drawn. It’s the next in line to release as a PDF, with several entries finding their way into the printed TRO later this year. The primary focus for the battle histories in this TRO (and in the upcoming FedSuns one) is the Combine invasion of the Federated Suns, and was an absolute blast to forge.

There are two units in particular I absolutely loved. I didn’t craft the stats for any of these – that hard work was a project unto itself, headed by Jan Prowell (owner of warrenborn.com), Patrick Wynne (MWDA automaton), and Johannes Heidler, among several others. But I fell in love with the Kamakiri (and its Shi variant) and the Tenshi.

Thought I’d share a little about the Tenshi (which means ‘angel’ in Romanized Japanese), to stoke the fires of fans of House Kurita…

Deployment

The first Tenshis were assigned to the Ghost Regiments. The DCMS believed that if the Tenshi proved to be a tactical failure—much as the Daboku nearly a century before—it would be confined to the  more “honorless” regiments. Ghost pilots embraced the new OmniMech and quickly realized its battlefield potential. In 3103, the First Ghost dropped two lances of Tenshis on Grumium in the Ghost Bear Dominion in a fast raiding action to seize a large weapons stockpile. Chu-i Albert Olmstead led his Tenshis straight to their target, blasting through a Striker Star before being stopped cold by a Dominion Nova from the First Freeman Cluster. Olmstead challenged the Bear commander to a Trial of Possession and was refused; the Ghosts were then surrounded by the Bears. Using their massed firepower, the Tenshis moved from target to target, cutting down Clan ’Mechs in short order as they shrugged off the Bears’ return fire. Six of the eight Tenshis met their DropShip at the facility and several hundred tons of Clan technology was claimed for the Dragon.

The assault company of the Sixteenth Galedon Regulars is comprised entirely of Tenshis, all at the request of Tai-i Michelle Taharski. The Wall, as the company is unofficially known, was responsible for the mass destruction of the capital city of Kirstie on Rowe. Taharski configured all of her Tenshis with as many  destructive weapons as possible. When the Wall moved on Kirstie, they were opposed by a regiment of planetary militia. The gaggle of Davion infantry and vehicles was no match for the twelve assault ’Mechs. After making short work of the militia, the company set about destroying more than three-fourths of the city.

Notable Units

Tai-i Michelle Taharski: Orphaned at a young age by to a Davion raid on her homeworld of Capra, Taharski has nurtured a fiery hate against all things Davion. Pragmatic about her future advancement within the Sixteenth, the tai-i has made the most of her position as company commander. That her request for an entire company of Tenshis was accepted by the Regulars’ command and the Procurement Department was unexpected but gratefully received.

Her hatred of the Federated Suns—and the Sandoval family in particular—came to the forefront when the Sixteenth was reassigned to the border of the Draconis March. She is methodical and somewhat predictable in her tactics. Those few who joke that the tai-i must be Lyran due to her LCAF-like approach to tactics find themselves nursing broken bones or suffering a mild concussion.

The Tenshi, by Justin Nelson.

BattleTech: A Strategic and Tactical Primer (Pt 7)

Continuing my sharing of the Strategy and Tactics Guide from the defunct Clan Box Set. This is from a first draft written in 2008. All errors are my own, including bad writing.

SCOUTS (RECON, PURSUIT)

‘Mechs in a scouting role are by nature extremely fast, using speed to achieve their objectives and to avoid the enemy. Use them when you need to reach an objective quickly (such as “capture the flag” games) or when you expect the opposition to also field fast ‘Mechs.

Most scout ‘Mechs are protected by light armor – but this doesn’t make them defenseless.  Keeping these ‘Mechs moving close to top speed makes them much harder to hit as it forces opponents to overcome an impressive target movement modifier. Scouts with jump jets should do so as often as possible and head for the heaviest woods available to use as cover.

Many scouts are equipped with several anti-battle armor weapons such as machine guns and small lasers; including one of these in a force where battle armor is expected can help neutralize that threat.

Koshi Prime

Highly maneuverable, the Koshi Prime is loaded with short- and long-ranged missile systems for quick fire support. With no minimum-ranged weapons, the Koshi can be quite the nasty surprise if positioned in an enemy’s rear arc; the multiple missile packs and machine guns can rip open and cause critical damage in one round to the rear of most light ‘Mechs. Keep it moving, however – standing still is an invitation to destruction. (Jade Falcon, Steel Viper)

Koshi A

The Koshi A retains the same movement curve as the Prime and is just as lightly armored. The main difference between the two is in the offensive loadout – the Koshi A carries nothing heavier than two machine guns. Use this ‘Mech as a dedicated battle armor delivery system and to hunt enemy battle armor; if you find yourself facing down another ‘Mech, use your mobility to retreat. Fast. (Snow Raven, Fire Mandrill)

Dragonfly Prime

A medium ‘Mech with an incredible movement curve, the key to using this scout ‘Mech is its jumping MP. By jumping 7 or 8 MP, you generate a +4 movement modifier (+3 for the 7 hexes and +1 for the jump). The two pulse lasers help minimize the jumping penalty on your attack roll (giving you a -2 modifier to your target number) and the SRM 4 system carries enough ammo that you can risk low probability shots at will. (Ghost Bear, Cloud Cobra)

STRIKER (RECON, PURSUIT, STRIKER)

Slightly slower than scouts, these ‘Mechs sacrifice a little speed for more weaponry. Their purpose is to unload a massive barrage of firepower, then back off to find another opening and do it all over again. Bold tactics work best with these units; many a battle has been lost or won based on how they are used.

In order to survive long enough to close in with your opponent, you need to keep strikers moving, using terrain to provide cover until you reach medium or short range with your target.

Dragonfly A

Just as mobile as the Prime version, the Dragonfly is a great striker ‘Mech. Use its jump to maximum effect by landing in an enemy’s rear arc and unloading all five ER medium lasers with a SRM 6 follow-up. While it will test your heat scale with such a high-risk attack (a +3 added to your to-hit roll because of the jump), you have the mobility to jump a distance away into cover and cool down before repeating. (Hell’s Horses, Blood Spirit)

Fenris Prime

Just as fast as the Dragonfly, the Fenris lacks the other ‘Mech’s jumping mobility but makes up for it with slightly more armor and a heavier ER PPC. The Fenris is good for hanging back and covering other striker units and is fast enough to take advantage of an enemy’s rear if the opportunity presents itself. (Wolf, Coyote)

Ryoken A

One of the best strikers of the Clans, the Ryoken has better-than-average speed, is moderately armored to withstand at least one devastating attack from a heavier ‘Mech, and mounts enough weapons to cripple or destroy most light and medium ‘Mechs at medium and short range. (Snow Raven, Goliath Scorpion)

Loki Prime

A heavy ‘Mech with a decent weapons compliment, the Loki should never be used as a lone striker unit. The Loki is quite capable of dealing significant damage from medium range and considering that the Loki has a lower speed curve than other strikers, it is best if you kept it at medium range of your opponents. The Loki’s weak armor coverage – most medium ‘Mechs have better – is a serious weakness that can quickly be exploited. (Jade Falcon, Fire Mandrill)

SKIRMISHERS (PURSUIT, STRIKER, SUPPORT)

Skirmishers are versatile ‘Mechs that combine mobility, armor and firepower to take the fight to the enemy and inflict serious damage. Unlike most ‘Mechs described elsewhere, skirmishers can be used in a variety of ways depending upon the situation and terrain.

Excellent at harassment tactics, use these ‘Mechs at the vanguard of your force while your more specialized forces get into position. Do not use these for direct assault, however. Their firepower – while respectable – is usually not capable of taking down heavily defended positions or assault ‘Mechs.

Black Hawk Prime

The capability of this ‘Mech lies in the tremendous firepower it brings to bear. Unloading every weapon on the ‘Mech (called an “alpha strike”) has the potential of doing 84 points of damage, which can practically cripple a heavy ‘Mech in one volley. However, using the Black Hawk in such a way guarantees it will shut down from the tremendous heat output. Use the lasers judiciously and alpha strike only sufficiently defended by its teammates for the next turn; a shutdown ‘Mech cannot move or fire until it cools off! (Hell’s Horses, Cloud Cobra)

Vulture A

While the Vulture A has two long-ranged weapons in the ER PPC and LB 5-X, the key to this ‘Mech is to get in close when the target’s armor is heavily damaged. The six SRM 6 launchers can deliver a devastating volley and each missile has a chance for critical damage if they hit an unarmored location. The armor on the Vulture is weak however, so keeping it in the thick of the fight for any period of time is not a wise idea. (Hell’s Horses, Star Adder)

Man-o’-War A

Equal in speed to other skirmisher ‘Mechs, the Man-o’-War is one of the faster assault-class ‘Mechs in the Clans. Solid armor protection makes it a good ‘Mech to use in a longer engagement, which might be needed as the Man-o’-War A only mounts a Gauss rifle, an LRM 10 and a SRM 4. Use it to snipe at range as you approach, then cover its teammates as they retreat from delivering their salvos. (Wolf, Goliath Scorpion)

IlClan and Beyond

Work began this weekend on a new BattleTech sourcebook, IlClan. I decided to step in to wrangle the project (not write, however) into shape for a couple of reasons. This book truly sets up the “unknown future” of the universe. Considering I’m looking farther ahead to writing/managing several books dealing with the line’s progression over the next few years, it’s important we have a solid foundation going forward.

Key to the process is developing the book’s structure and timeline. Because I’m looking ahead and making sure plot elements and characters fit together, I do a lot of brainstorming to help structure my thoughts. From that, I craft an overarching outline and then drill down based on the project.

So over the weekend, I pulled out an easel pad and went to work. Since I’m managing the project, I thought I’d blog the process from genesis to finish, just as I’ve done for Wars of Reaving and Total Chaos.

This is where it all begins.

The genesis of plot, from Era Report 3145 forward.

Faith, Science Fiction, and Gaming (Part 2)

Part 2 of Saving the Game’s podcast, which has me as a guest host, posted over the weekend. (You can catch information on Part 1 in my blog post last week.)

In this concluding segment, I talked about:

• Transhumanism setting
• Selective settings for GMs and gamers
• Star Wars RPG (and an awesome sidebar regarding my college campaign) <<Seriously, if you listen to nothing else, this story is epic. Starts at 13:50.
• Battlestar Galactica (the new version)
• Examples of story arcs involving Christian characters in a setting designed for them
• Christianity and other worlds
• Dead Space series and the questions it raises
• What would Christianity look like in the future, and the setting potential therin
• Words of thanks
• My thoughts on being a Christian and a gamer in the church

Yes, we do talk about Christianity, but in the context of games and science fiction settings and character. It’s not a “come to Jesus” sermon or forced proselytizing.

I know some of my readers might be instantly turned off because this involves “religion.” All I ask is that you set aside the stereotype that just popped into your head and listen with an open mind. I thank you in advance for that.

If anything can be gained from this, people who enjoy my work with BattleTech or other material I’ve written will (hopefully) come away with a better understanding of how this particular writer’s mind works.

Faith, Science Fiction, and Gaming (Part 1)

A few weeks ago I was invited to participate in a gaming podcast. This one was not your typical game industry interview, however. Saving the Game is a group of gamers who are Christian; their podcasts focus more on how elements of the Christian walk and faith can interact with games and gaming. It’s not a sermon or a slam on gaming; it’s just guys who game who happen to be of similar faith, discussing their gaming hobby.

The interview was the most fun I’ve had on a podcast or discussion about gaming. We ended up with so much material the podcast was broken into two episodes. The first posted this weekend. (You can listen via streaming or mp3 download.)

In this one, I talk about:

• Games’ Most Wanted, the new book authored by Chris Hussey and myself due in July 2013
• What an Assistant Line Developer does for BattleTech
• Science fiction, religion, and faith in various books and stories
• Shadowrun
• BattleTech (specifically, House Kurita and ComStar/Word of Blake)
• Gamemastering and storytelling

Yes, we do talk about Christianity, but in the context of games and science fiction settings and character. It’s not a “come to Jesus” sermon or forced proselytizing.

I know some of my readers might be instantly turned off because this involves “religion.” All I ask is that you set aside the instant stereotype that just popped into your head and listen with an open mind. I thank you in advance for that.

If anything can be gained from this, people who enjoy my work with BattleTech or other material I’ve written will (hopefully) come away with a better understanding of how this particular writer’s mind works.

I hope you enjoy it. Part 2 will post next week.

BattleTech: A Strategic and Tactical Primer (Pt. 6)

Part 6 of the Strategy and Tactics Guide from the cancelled Clan Box Set. Errors are my own, as this is straight from a first draft.

BATTLETECH FORCES

Not every ‘Mech is appropriate for every type of scenario, so match the machine to the mission when choosing BattleMechs. This section will help you do that by providing a feel for the strengths and weaknesses of the various units available in BattleTech. This information is particularly helpful when you get to choose the ‘Mechs you will use for a scenario, but it also can help you make the best use of your forces when you are assigned a particular mix of ‘Mechs, all of which are not necessarily ideal for the task at hand. The best commanders make the most of what they have and expertly fit square pegs into round holes.

For the sake of discussion, we have divided the ‘Mechs available in the BattleTech into seven broad categories: duelists, scouts, strikers, skirmishers, brawlers, snipers, fire support and juggernauts.

The ‘Mechs assigned to each category are deployed in a similar fashion by virtue of their movement capabilities and weapons complements. Each category description provides a discussion of the characteristics of ‘Mechs included in that category and their use in game play, followed by brief comments on each specific ‘Mech. If players purchase any of the various technical readouts that include many other BattleMech designs, they only need to compare each design’s relative characteristics to those found here to find in which category they belong.

The Clan names that appear in parentheses after each ‘Mech description indicate both an Invader Clan and a Homeworld Clan that most commonly uses the ‘Mech.

Military Organization

Within the BattleTech universe, the smallest organization of a Clan force is the Star, which consists of five units – one for each point of a star. A Clan Star can be comprised solely of BattleMechs, battle armor, or a mix of both. One ‘point’ of battle armor is comprised of five troopers, so if you have a Star of battle armor, you have five points of five troopers, or twenty-five battle armor suits [5 x 5 = 25]. A mixed Star can contain any variation of ‘Mechs and battle armor, such as three ‘Mechs and two battle armor points (ten total troopers), or four ‘Mechs and one point of battle armor (five total troopers).

Generally speaking, Stars carry a name that is equal to their combat purpose, usually based off of what units comprise the Star. For example, a unit containing nothing but Strikers (see below) would usually be referred to as a “Striker Star,” while a Star of Scouts would be referred to as a “Scout Star.”

In parenthesis next to each of the eight category definitions in this section, one or more Star names are provided. Once again, note that these are not hard and fast rules but instead are general category names that players can use to help organize forces as they start building and fielding their own lances.

Battle Armor

Referred to by the Inner Sphere as “Toads” and called Elementals in Clanspace, battle armor troopers are the pinnacle of infantry-style combat. These power armor suits can be carried across battlefields by Clan OmniMechs and dropped off for close-quarters combat and additional support. (All the ‘Mechs in this box set are OmniMechs and can carry Toads.) These Toads move as a group, jumping up to 3 hexes a turn, which gives them great mobility across most terrain. Unlike ‘Mechs, they have no facing and can fire in any direction. In addition, they carry two shots of SRM 2 missiles apiece; a full salvo can severely damage a light ‘Mech and give much pause to medium and even heavy ‘Mechs.

Each Toad suit is also equipped with a small laser; while the range is small, they can be a welcome addition in a close-quarters battle. Additionally, because battle armor can conduct swarming and anti-‘Mech leg attacks, they can cripple an enemy unit unlucky enough to have them nearby.

DUELISTS

These ‘Mechs are normally not part of any strict Star formation – indeed, a Star made up primarily of duelists is more of a weakness than a strength, particularly because each ‘Mech is more geared towards the ritualized, individual combat between enemy warriors and not necessarily geared towards teamwork. Thus, you may find a duelist in nearly any type of Star, but not a Star comprised totally of duelists.

Designed and used primarily for personal combat, these ‘Mechs can compliment other Star members in a sniper, fire support or even a brawler role but excel mostly in single combat against an equal or greater foe. While challenging and beating a lesser opponent isn’t frowned upon, it does not confer as much honor to the warrior as defeating a greater opponent would.

Uller Prime

The Uller is not as fast as other light ‘Mechs, nor is it as heavily armored. It does mount an array of weapons across its frame, however – a missile rack, lasers, and an autocannon – and all are smaller-scale damage weapons. Ideal for taking on a similarly-sized opponent, it does not last long against most other ‘Mechs due to its light armor load. If using an Uller Prime, squeeze as much MP as possible during its move. (Jade Falcon, Blood Spirit)

Fenris A

Lightly armed but incredibly fast, the Fenris A is a favorite of many Clan warriors for dueling. The armor protection will survive most initial large weapon attacks, enough to allow the pilot a second chance. Its LB 2-X gives it incredible range to strike from, but the small autocannon will take a long time to penetrate most ‘Mechs outside the light weight classes. It is important to utilize the Fenris A’s incredible speed and outmaneuver your opponent, rather than rely on sniping from long and medium ranges. (Wolf, Coyote)

Thor A

The Thor A only mounts three weapon systems but can use all of them every turn without turning up the Heat scale. Highly maneuverable with jumping 5 MP, the Thor mounts excellent armor coverage. It is an all-around solid design, capable of defensive and offensive tactics. The only weakness is its limited ammunition; make sure each Gauss rifle shot has a good chance to hit, as 8 rounds go very quickly in a fast-paced duel. (Jade Falcon, Steel Viper)

Gladiator A

Heavily armored, the Gladiator A is a decent dueling ‘Mech but can also be used in a brawling mode if necessary. The MASC gives it a bit of an edge in speed, which can open up opportunities to sneak in rear arc shots or allow you to close quickly into a developing skirmish. The large number of lasers on the Gladiator A can quickly drive the heat up on those players not careful; poor heat management can find this ‘Mech exploding due to the ton of machine gun ammo being carted around in the torso. (Ghost Bear, Coyote)

BattleTech: A Strategic and Tactical Primer(Pt. 5)

Part 5 of the Strategy and Tactics Guide from the cancelled Clan Box Set. Errors are my own, as this is straight from a first draft.

PHYSICAL ATTACKS

Don’t overlook the chance to inflict a few extra points of damage by making physical attacks. Though Clan warriors tend to frown up such actions, it is not forbidden and in some Clans, actually encouraged against Inner Sphere foes. The main risk in making physical attacks is that you must be adjacent to your target to execute kicks, punches and other such attacks, which usually puts you at risk for physical attacks in return. Also, if you and/or your opponent decide to make a weapons attack at such close range, all the weapons are likely to hit – a potentially deadly situation.

While physical attacks are rare for Clan warriors to use, it is always wise to understand what these attacks may entail, since Inner Sphere opponents have no compunction in using them against Clan foes.

Punching

Punching attacks have numerous advantages. First, a punch is one of the few types of physical attack that does not cause damage to the attacking ‘Mech. But, perhaps more importantly, you roll the attack’s hit location on the Punch Hit Location Table, which offers a 1 in 6 chance to hit the target’s head. That means a punch is six times more likely to hit a ‘Mech’s head than a regular weapons shot!

Because you cannot make a punching attack with an arm that fired a weapon during the current turn, you must decide to punch before you declare your weapon attacks. A ‘Mech can punch once with each arm in a single turn.

When adjacent to other ‘Mechs, large BattleMechs should almost always punch rather than firing arm-mounted weapons with a minimum range. For example, the Gladiator Prime mounts a Gauss rifle in its left arm and two ER large lasers in its right. Firing both ER large lasers will do plenty of damage if both to-hit rolls are successful, so punching with the right arm is an option only if heat is a problem (the lasers each generate 10 points of heat). Firing the Gauss rifle will do 15 points of damage for 1 point of heat, but a Gauss rifle fired that close to a punchable target also gains a +2 to-hit penalty due to its minimum range. In this case, it may be preferable to not fire the Gauss for the easier punch attack with the left arm. Before slugging away, however, keep in mind that missing or damaged arm actuators adds a +1 to-hit modifier to punching attacks (see Intro Rulebook p.XX). In the example above, the Gladiator would have only a +1 modifier to its punch attack, as opposed to the +2 for the minimum range modifier for the Gauss rifle attack.

Clubbing

‘Mechs rarely use clubs to attack opponents, because players rarely fight scenarios in which suitable clubs are available. Other ‘Mech’s limbs make good clubs, for example, but few attacks result in a limb being blown off. ‘Mechs can uproot trees to use as clubs, but must spend a full turn doing so. Finally, a ‘Mech must use (and have functional) two hand actuators to wield a club. Obviously this attack offers few advantages over a punch attack.

Physical Weapons (Hatchets)

Though none of the ‘Mechs in the Clans come equipped with hatchets (or any other physical attack weapons), you may face an opponent using an Inner Sphere ‘Mech that does. These massive weapons function just like a club, except a ‘Mech can wield them with one hand.

Pushing

The best situation for using a pushing attack is against a ‘Mech standing at the top of a hill or on the edge of the map. Though some players would recommend a charging attack under these circumstances, a push can be just as effective and causes no damage to the attacking ‘Mech.

Most scenarios call for the “destruction” of any ‘Mechs that leave the map, either intentionally or accidentally. If an enemy ‘Mech is standing at the edge of the map, a push off the map can “kill” the ‘Mech for game purposes, causing no damage to your ‘Mech.

A successful push attack may also cause the target BattleMech to fall; this is a particularly effective attack if the target ‘Mech falls down a hill. Especially for a heavy ‘Mech, a fall down a hill can be more damaging than two punch attacks. It’s true – the bigger they are, the harder they fall.

Kicking

Successful kick attacks can cause a lot of damage, often effectively crippling a ‘Mech. Kick attacks offer a good choice for additional attacks in a turn. (A ‘Mech cannot kick with a leg that fired a weapon in that turn, but few BattleMechs have leg-mounted weapons so this is not much of a restriction.) As an added bonus, a ‘Mech that is kicked successfully must make a successful Piloting Skill Roll or fall down.

On the down side, if you miss a kick, you must make a successful Piloting Skill Roll or your ‘Mech falls. This is a good reason for not making a kick attack if the attack requires a high to-hit number. If your MechWarrior has a poor Piloting Skill or the ‘Mech has suffered damage that affects Piloting Skill Rolls, you may prefer to make a punch attack rather than a kick attack.

Charging

A charging attack can be tremendously damaging to an opponent, especially when the attacking ‘Mech possesses a combination of speed and weight. Fast, heavy ‘Mechs such as Gladiators and Mad Cats make good charging attacks, as do Pumas  and Fenris on the light and medium weights. A charging ‘Mech cannot make any weapon attacks in the turn it charges, however, and so the player must weigh this disadvantage against the potential damage the charging attack might inflict.

In general, charging attacks have a low probability of success and cause damage to the charging ‘Mech as well as its target. Only if your ‘Mech is damaged or has lost its ranged weapons should you consider a charge, and then only if there is a good, clear path between your ‘Mech and the target.

Death From Above (DFA)

This attack is very difficult to pull off and decidedly rare. It can cause your ‘Mech serious damage. That being said, DFA is one of the most dramatic, enjoyable moves you can execute in BattleTech, and nearly always earns the admiration of your opponent and onlookers if it is successful. It is considered good form to yell out “Death from above, surat!” when attempting this bold maneuver. You may even get a round of applause!

In practice, you should only make a DFA as a last resort. Use it primarily when your jump-capable ‘Mech is severely damaged or in danger of being destroyed soon anyway. This attack allows you to go out with a bang, instead of a whimper.

BattleTech: A Strategic and Tactical Primer(Pt. 4)

Part 4 of the Strategy and Tactics Guide from the cancelled Clan Box Set. Errors are my own, as this is straight from a first draft.

WEAPON ATTACKS

Generally, it’s best to always fire every weapon that has a chance of hitting the target, because one can never predict which weapon will mean the difference between victory and defeat. Players should also, hover, consider overheating problems and a ‘Mech’s ammunition supplies when making weapon attacks.

Heat

The main limit on a BattleMech’s overall firepower is heat. Nearly everything a ‘Mech does generates heat, and weapons fire is certainly no exception. When choosing which and how many weapons to fire, heat is usually the deciding factor.

A few ‘Mech designs, such as the Uller A or the Dragonfly Prime, can fire all their weapons and move at full speed in the same turn and never even think about overheating. These ‘Mechs are rare however, and usually lack much of a punch. Most BattleMechs, such as the Masakari Prime, suffer moderate heat problems if they fire all of their weapons at once. It’s fairly easy to manage the heat level on this units, however, because you will rarely need to fire the ‘Mech’s full weapons array simultaneously. With ‘Mechs like these, go ahead and overheat whenever you feel confident of a successful attack. On more difficult shots, simply hold off firing at least one weapon that requires ammunition. You’ll avoid overheating and conserve ammo at the same time.

Then there are ‘Mechs with real heat problems, such as the Black Hawk Prime. Fortunately, these ‘Mechs usually carry either two distinct types of weapons (short range and long range) or an overabundance of one (medium range). Rather than firing all your weapons every time you attack and hoping to hit something, only fire those weapons that have a good chance of hitting.

Finally, take a look at the Heat Scale in the lower right corner of the record sheet. Note that there are no adverse effects for a heat level of 1-4 points. This means you can exceed a ‘Mech’s heat sink capacity by 4 points before it has any effect on your ‘Mech at all.

Ammunition

Most ‘Mechs carry an ample supply of ammunition for an average BattleTech game (team teams of four ‘Mechs each, battling on two mapsheets). If your weapons carry less than ten shots, however, or if the game is played with significantly larger forces, you will have to conserve your ammunition.

The easiest way to conserve ammunition is to choose not to take shots with a to-hit number of 11 or 12. In general, if the to-hit number is 10, you must decide if the chance to score a hit is worth the ammunition you waste if the shot misses. Unless the target is heavily armored and the shot is unlikely to cause critical damage, it’s usually worth it.

As a secondary consideration, players may want to reduce their ammo loads to decrease the potential damage of ammo explosions. Some weapons, most notably machine guns and SRM 2s, carry large supplies of ammunition per critical space, which can inflict substantial damage if hit. If you feel inclined to reduce the risk of explosion at the expense of battlefield endurance and your opponent agrees, you can carry a “light load,” reducing the total amount of ammunition carried for any of your weapons. Write any such changes clearly on your record sheet so your opponent also knows exactly how much ammo you are carrying. Keep in mind that you can’t reverse your decision halfway through the scenario: once you hit the field, you’ve got only the ammunition indicated on your record sheet.

Clan Code of Honor

During their inception and throughout most of their history until their invasion of the Inner Sphere, Clan society developed a ritualized process of warfare that aligns with their “waste not, want not” mentality. Most Clan battles tend to utilize this code of battle, formally known as “zellbrigen.” In a nutshell, each Clan unit challenges one of his opponents, usually a ‘Mech that is of equal or greater power than itself. The aim of the pilot is to heap glory on him or herself by winning against an equal or greater foe.

The Clans attempted to use this type of ritualized combat when they faced Inner Sphere forces during the initial invasion; however, the militaries of the Great Houses and other factions found ways to manipulate such a rigid battle code against the Clans. As a consequence, most Clans refuse to use such an honored combat system with the Inner Sphere “barbarians” and tend to use the same tactics that the Inner Sphere utilizes in their warfare.

For more details on zellbrigen and the Clan Honor Code, please see Total Warfare, p. 273.

Concentrated Fire

A standard tactic of most Inner Sphere militaries, many Clans also use this tactic when their opponent is an Inner Sphere force.

A ‘Mech can take many hits before being destroyed, so concentrate your attacks on a single target whenever possible. By taking an entire ‘Mech out of action more quickly, you deny your opponent the use of that ‘Mech. If you spread your attacks across many targets, you may inflict damage on them all but you’re unlikely to destroy any of them. Even damaged ‘Mechs can continue to fire back, but a destroyed ‘Mech is no longer a threat. Therefore, concentrating fire against a single target is usually preferable even when easier targets present themselves.